Thanks for the link. Will give them a call tomorrow for a bit of a chat.
yeh i missed that bit originally " my bad " .. i only took that bike flat out once .. or almost .. think it had a smidge lef ...
Soapys hit the mark with what's out there, 35/37s , may get some enquires on other bike sales sites, tough times selling any rec t ...
If switching just the indicator to LED you can simply replace them (though ore-CANbus may need a load balancer). If you want them ...
Thanks, mate, Yeah I believe it was 2009 that they brought in changes to the frame and engine mounting on the RK and other tourers ...
Did notice also when checking this site out that there has been a number of complaints, many from the US and a few from South Afri ...
Thanks for the reply mate but as suspected one side fried .Under warranty so new one coming
nah nah, I bought it from Stealer. We all trust stealer, don't we?
SOLD
I roll them in with a 1 7/16"AF 3/4" drive socket, you can use a short extension if you want a handle.Cheers.
Follow the linkhttps://www.youtube.com/watch?v=m3ccpoXrsJo
Correct tools are a must.I cracked the cast rear engine/swingarm mount on the gearbox of my dyna trying to get that nut off.If the ...
hand pump vacuum bleeder works well plenty of kits on ebay about 25 dollars delivered , have used and work well . just seal the bl ...
I fitted Boards Levers etc off a Switchback onto my 2007 Superglide. Easy Peasy.
Anyway.... I will let you know how it holds up after a year of use, or if it falls apart earlier.Let’s all read another post.
thanks Tony as described
I have some. It works well, but Bowdens Clean Detail followed by a bit of wax on the painted bits works just as well and is cheape ...
all good mate .. hope u get it sorted : )
"Not sure if they had a friend in the Rego Dept or did a swifty but I did sell it sometime later and had no issue changing rego ow ...
Any time I’ve enquires about getting ‘bolt in’ cams I get hit with ‘oh you need to replace the pushrods too oh you have that tuner ...
