I must say, both look sensational. I think that at this point I lean towards the Medallion set. Thanks for the info.
Not Sure about BDL cover, But i made my own when i ran a three inch open belt primary on a Shovel it bolted on. mine still doing t ...
That's what I think I'll do. Copy over the richer AFR's and test. My lasy 4 vtune looked good, no knock at all.
Haha lucky mining blokes with all their money! Tell him to just buy a 120r engine ??
all done , sourced from , pro pilot U.S. very helpful with specs and data, piss easy to fit ...
G'day fellas. I'm new to the Forum but have a question only someone who has done a lot of work on old 1340's would ...
What about going up a couple of teeth on the gearbox pully ... will be just a little more sluggish off the bottom but not much as ...
read on the net if you drill hole in the end it give good midde ground between standard and the quiets - quiets seem to muffled
For what it's worth, I have those mirrors, and I use them as front blinkers instead of running lights (15 FXDB). This enabled ...
Thanks champ.
I actually just bought one a couple of weeks ago. I started making one but when added up cost and my time, not worth it. &nb ...
Team, what is the "typical" life expectancy for front pads on a twin disc, ABS equipped VROD? I have a 2009 NRS with ...
Plenty of Nightrod pull off's around. I had XR1200 pull off's on mine.
Thanks Bilko, no idea - going to try the locktite route first and failing that I may swap my passenger pegs over with those ones a ...
You also need a comfortable Chair. Something like this one perhaps?
Good advise gents may have saved a member a few bucks and a truck load of heart ache.......
It's a carby bike ( remember those haha ??) No "Tuner" help there
Mate Don't! PM still has same name but in reality it is not Performance anymore it's all show. rubish if you ask me , Brem ...
Thanks Brian , I will be in touch
Stretched them out of fiberglass on original bags
