Latest comments

Ok, I'm not an expert on respoking, but I recently completed respoking two BSA wheels, and they both turned out pretty good.  ...

 thanks chimney will check US site cheers mate

 Thanks Weepete, It does appear to be the old story, if you want it done right do it as per the manual and do it yourself.
...

Hooker never made them with O2 Ports for Twin Cams. Evo ones will bolt on

hi,  not a very good idea to fit-up as the wheel bearings  will be inboard  to the forks on a 3/4" axle  , put ...

if you go to chain drive you could prolly fit a 150 if it will fit the rim.

Try some fine wet and dry sand paper with water  

Thanks. It's a standard chrome 09 fatboy rim. I'm in Brisbane.

Best use a tape measure.For sure its going to be 17 + 4 + distance to brake.,,,,,,,or the old cable + 21.

Thanks for the replies I found a set of mini apes from PS for under $100 so I am going with them

Ah, thanks Walka, hopefully be in touch with you guys sooninsh for one of those patriot fuellers too   cheers

they cum in + 6" , +8", +12" ,    ( i have a + 12" )  sporty riders go in deeper & ...

So Gnoo, if you make it through the woods where would you be?

Guy at work had the same problem after a ride down to Eden on his new fatboy lo. Was ready for a service after he returned home an ...

Thanks for the feedback guy's. I have also donbe some surfing and when time allows will do the IM display diagnostic check. From w ...

http://partsfinder.onlinemicrofiche.com/ronnies/hdm_oem/hdmc.asp

yeah looking into a bike lift atm. im in eltham Milo, how about you?

Thanks Angry//////// one less thing I didn't know 

 Maybe the volts are less likely to fall out if the bike isn't leaning so far over...  

goes to show , it pays to shop around.