G'day fellas. I'm new to the Forum but have a question only someone who has done a lot of work on old 1340's would ...
What about going up a couple of teeth on the gearbox pully ... will be just a little more sluggish off the bottom but not much as ...
read on the net if you drill hole in the end it give good midde ground between standard and the quiets - quiets seem to muffled
For what it's worth, I have those mirrors, and I use them as front blinkers instead of running lights (15 FXDB). This enabled ...
Thanks champ.
I actually just bought one a couple of weeks ago. I started making one but when added up cost and my time, not worth it. &nb ...
Team, what is the "typical" life expectancy for front pads on a twin disc, ABS equipped VROD? I have a 2009 NRS with ...
Plenty of Nightrod pull off's around. I had XR1200 pull off's on mine.
Thanks Bilko, no idea - going to try the locktite route first and failing that I may swap my passenger pegs over with those ones a ...
You also need a comfortable Chair. Something like this one perhaps?
Good advise gents may have saved a member a few bucks and a truck load of heart ache.......
It's a carby bike ( remember those haha ??) No "Tuner" help there
Mate Don't! PM still has same name but in reality it is not Performance anymore it's all show. rubish if you ask me , Brem ...
Thanks Brian , I will be in touch
Stretched them out of fiberglass on original bags
Fitted.
Yeah I seen that, thought it was a bit rich! Can get the kit for under $300 and shipping is $60 for memory from RevZilla.com
welcome mate should be able to find a workshop manual online for free,oils motor just use aquality mineral 20/50 like penrite auss ...
Hi There Has anyone on here fitted the quiet baffles in freedom sharp curve radius. I have recently install ...
Finn moto, heavy duty and look like jeans. Their hoodie is also great.
