Online: tussuck, STEAMER

Pew Power Commander for 2009 model year motorcycles

  • Uncle Ho
    Uncle Ho
    16 years ago
    (Note: PCV’s will only be available for 2009 model year motorcycles)
    NEW Power Commander V Basic Features List
    • Reduced size from PCIIIusb (less than half of the size of PCIII)
    • USB powered from computer (9 volt adapter is no longer needed for programming)
    • 2 position map switching function built in (map switch not included)
    • Gear/Speed input (allows for map adjustment based on gear and speed)
    • Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
    • With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
    • Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
    • 10 throttle position columns (up from 9 on PCIIIusb)
    • Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
    Harley Davidson Units Also Include:
    • Fuel and Timing control
    • Rev Xtend
    • “Warm Up” fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on it)
    • Software will display J1850 data from bikes’ stock ECU (this is data such as temp, fuel pulse width, timing advance, spark knock, etc.)
    Auto Tune for PCV (all models)
    • “Auto Tune” kit will be available that includes Wide Band O2 sensor(s) and control box(es). It will plug directly into the PCV and allow automatic fuel adjustments.
    • It can make a map for each gear and on a Harley Davidson models it can map each cylinder separately for each gear if needed. (basic settings would make one map for all gears)
    • Each map cell is individually adjustable so you can specify an exact AFR value for each area if needed.