HD Forums Australia
Home
Topics

WTB: Hydraulic clutch release cover 07 springer

  • Vic
    Vic
    8 months
    Long shot I know but worth a shot. Chasing a hydraulic clutch release cover for an 07 cvo springer. It's off a 110, not sure if any others would fit?

    IMG_20240302_150835.jpg
    IMG_20240302_150849.jpg
  • Retroman
    Retroman
    8 months
    As you probably know already most all the other 2007/2008/2009 bikes of all models were cable clutch.

    The CVO Springers had the hydraulic clutch lever system.

    I can't rightly remember what other models that year had the hydraulic clutch other than V-Rods.

    the 07/08/09 CVO Springers would most likely have the same part numbers for that part.

    Ronnie's HD partsfinder a good place to start.

    later touring models the part is different and the bleeder screw is in a different place
  • Vic
    Vic
    8 months
    Yeah, as said, a long shot Retroman. Pretty sure the 08's and 9's will be the same but that's about it I think.

    Others I have seen off later models all differ to the one I'm after.

    Looks like a newie will be the go, do Ronnies ship to Aus do you know?
  • Retroman
    Retroman
    8 months
    No HD dealers in the continental USA are allowed to ship out of country. (They used to be able to!)

    HD mothership rule of some 10+ years at least.

    Used parts, and NOS parts from the places that stock "obsolete" HD parts can and will send.

    get the part number from the Ronnies HD site and then search ebay USA for that part number.

    I find chit that way all the time.
  • B0nes
    B0nes
    8 months
    I've used Shipito when I have needed to buy stuff from the US. Has worked the few times when I needed stuff from the US and companies I'm dealing with aren't allowed to ship to OZ

    Could be worth a shot if you can't find local

  • Vic
    Vic
    8 months
    Cheers guys.
  • Retroman
    Retroman
    8 months
    Did you have any luck mate ?
  • Vic
    Vic
    8 months
    Unfortunately my search for a second hand one went nowhere Retro so ended up biting the bullet and ordering new from the local dealer. Bit of a wait but should be here in a week or 2.
  • Retroman
    Retroman
    7 months
    Probably the price of rarity/scarcity.

    How much in Aussie $shekels may I ask ?
  • Vic
    Vic
    7 months
    About $630 Retro but you get the slave and nipple with that as well, 
    for that though, I thought a blow job may of been in order as well lol.

    Anyway, have clutch again now.


    IMG_20240413_153404.jpg
  • Retroman
    Retroman
    7 months
    Hay-zoos !
    I'll be hoping my setup holds up....
    Thanks for the info'
Topics