HD Forums Australia
Home
Online: tussuck
Topics

Xlh1200S forks, need some help.

  • Ozztropolis666
    Ozztropolis666
    1 year ago
    Hey guys. Got a bit of an issue. My Showa forks were sitting for a while and I noticed there was a bit of corrosion on the top cap/adjuster for my 1200s forks. I was about to re-build them and clean them up and for some dumb reason I tried to free the adjuster knob on the top without giving it any WD or giving it a little tap or anything, just cranked it. I snapped the pin on the adjuster. Followed by wondering wtf I was thinking, I found the top cap adjuster is obsolete, can’t get one anywhere. 

    I want to replace both top caps but not sure what to use, or how to make it work. Can I just buy some adjustable pre-load caps and ditch the original setup? I basically want to replace the tops, and use them as standard forks instead of the fully adjustable system, as I can’t get the parts to make it original anymore. 

    Any help would be appreciated. 
    image.jpg
    Original
    image_1.jpg
    Broken top
    CEF0A6D6-CF06-4B1C-9DB0-D5AFC5EB6999.jpeg
    Diagram.
  • speedzter
    speedzter
    1 year ago
    I'm sure you know with the cartridge forks, they are not a simple preload adjuster.
    This may not be a cheap fix.
    A lot of Showa parts available, or can be manufactured .
    Try contacting these guys. (showa parts distributor) :-


  • Ozztropolis666
    Ozztropolis666
    1 year ago
    Quoting speedzter on 09 Oct 2022 11:22 PM

    I'm sure you know with the cartridge forks, they are not a simple preload adjuster.

    This may not be a cheap fix.
    A lot of Showa parts available, or can be manufactured .
    Try contacting these guys. (showa parts distributor) :-


    Yeah it’s been a while since I had them apart. Thanks I’ll get in touch with them 
Topics