What did you guys do on your bikes today?

10/52
  • tussuck
    tussuck
    3 years ago
    Polished the new sissy bar insert so it’s about ready for chrome.  Now to do the main bar to the same shine and then weld the two together .
  • evo94
    evo94
    3 years ago
    lookin shithot Tus !
  • Grease Monkey
    Grease Monkey
    3 years ago
    Quoting Neale on 22 Oct 2022 07:26 AMedited: 22 Oct 2022 07:30 AM

    Had my primary adjuster done at 63,000kms.

    Now at 123,000 I decided to do it myself this time.
    Sorta makes the stories about how shit the MoCo adjusters are, are wrong. Sorry I pulled it apart, it had plenty of life left.

    Quoting 408 on 22 Oct 2022 09:03 PM


    The problem with the auto adjusters was not so much the shoe. There have been a few revisions. The earlier ones were not strong enough and some deformed under load, and then the teeth design was changed to prevent overtightening of the chain which loaded the bearings.

    My 2006 Dyna Wideglide had the first version of the primary chain auto adjuster, it actually bent in use, replaced it with the new(at the time) SE manual adjuster, lasted one ride to the top of the range, tried the mods that the USA folk suggested but it was just way too noisy, replaced it with the new updated stock adjuster, never a problem thereafter. Still have the stock one in my Slim, chain has been fine on the 3 occasions I've had the cover off. You can mod the stock one to make it fixed and with the spring still in use, a simple but challenging job haha.
  • Baloffski
    Baloffski
    3 years ago
    Quoting diomac on 20 Oct 2022 08:37 AM

    Milestone day today as I got the front end finished.  Legend cartridges in the front forks, Killer Custom lower fork cover and fender installed after getting the fender back from paint.  This she is coming along nicely now.

    Quoting WideglidingNZ on 20 Oct 2022 04:17 PMedited: 20 Oct 2022 04:17 PM

    Bikes looking awesome well done, I just ordered a Memphis shade road warrior fairing with a 11" dark smoke screen for my soon to arrive FXLRS, I just need the flipping bike to arrive now, the ship with my bike on is waiting for a berth at the highly congested Ports of Auckland, I think I've now spent around 5k on accessories   

    Yes.
    Go Matey. Carnt take stuff withya. Enjoy here Now...  cheers 
  • WideglidingNZ
    WideglidingNZ
    3 years ago
    Quoting John.R on 22 Oct 2022 12:40 AM

    Pipe turned up today, was exactly three months from ordering it till it was shipped, then a few weeks in shipping.

    have you fitted this lovely pipe yet John?
  • tussuck
    tussuck
    3 years ago
    The new stance with 3" lift in the forks.  On real difference in ride or handling and it nice to have some cornering clearance for once (its an 883 Low so has bugger all to none normally)

  • John.R
    John.R
    3 years ago
    Quoting John.R on 22 Oct 2022 12:40 AM

    Pipe turned up today, was exactly three months from ordering it till it was shipped, then a few weeks in shipping.

    Quoting WideglidingNZ on 02 Nov 2022 02:33 PM

    have you fitted this lovely pipe yet John?

    Nah I haven't, I'll do it at the same time as I do all the cam/injectors/manifold etc. Will probably do wheels and bars at the same time.
  • obisteve
    obisteve
    3 years ago
    Quoting tussuck on 02 Nov 2022 09:19 PM

    The new stance with 3" lift in the forks.  On real difference in ride or handling and it nice to have some cornering clearance for once (its an 883 Low so has bugger all to none normally)


    Nice Tussuck, nice. I can hear the old FXR Sport tubes in the shed talking to me now, wanting to be fitted. What's next, a call to Led Sled for their kickstart kit?


  • tussuck
    tussuck
    3 years ago
    Quoting tussuck on 02 Nov 2022 09:19 PM

    The new stance with 3" lift in the forks.  On real difference in ride or handling and it nice to have some cornering clearance for once (its an 883 Low so has bugger all to none normally)


    Quoting obisteve on 02 Nov 2022 10:55 PMedited: 02 Nov 2022 10:55 PM

    Nice Tussuck, nice. I can hear the old FXR Sport tubes in the shed talking to me now, wanting to be fitted. What's next, a call to Led Sled for their kickstart kit?



    LOL.... No kick start as I'm too old to risk me knees - even a fake kicker would look wanky I recon.
    Next up are:
    1.  Chrome the rear sissy bar in the next couple of weeks - just waiting for the chemical tub to arrive from Bunnings
    2.  Current handle bars and the sissy bar mounts will be chromed next  
    3.  New Handle bars are all welded and now need risers - which will have to wait for the lathe to be restored.
    4.  Paint the wheel spokes some colour - most likely black to offset the polishing
    5.  and then the bloody exhaust system.....
     

  • Grease Monkey
    Grease Monkey
    3 years ago
    Beer run, absolutely necessary 
  • paulybronco
    paulybronco
    3 years ago
    Its fucking freezing here and raining.....going to wimp out and jump in the car to grab a ctn.
  • Grease Monkey
    Grease Monkey
    3 years ago
    Quoting paulybronco on 04 Nov 2022 03:51 AM

    Its fucking freezing here and raining.....going to wimp out and jump in the car to grab a ctn.

    Sunny Queensland aye
  • Grease Monkey
    Grease Monkey
    3 years ago
    Because she got me beer I cleaned her, doesn't happen often, now I remember why....
  • 408
    408
    3 years ago
    Quoting Grease Monkey on 04 Nov 2022 04:04 AM

    Because she got me beer I cleaned her, doesn't happen often, now I remember why....


    What were you doing with the sockets ?

  • Grease Monkey
    Grease Monkey
    3 years ago
    Quoting Grease Monkey on 04 Nov 2022 04:04 AM

    Because she got me beer I cleaned her, doesn't happen often, now I remember why....

    Quoting 408 on 04 Nov 2022 04:09 AM


    What were you doing with the sockets ?

    Took the heavy breather element off n cleaned an re-oiled it, it looked grey, bit much sun probably, big orange thing in the sky for you Tassie folk haha
  • tussuck
    tussuck
    3 years ago
    Quoting Grease Monkey on 04 Nov 2022 04:04 AM

    Because she got me beer I cleaned her, doesn't happen often, now I remember why....

    Quoting 408 on 04 Nov 2022 04:09 AM


    What were you doing with the sockets ?

    Guarantee that the 10mm socket is missing to by the looks of things!
  • Grease Monkey
    Grease Monkey
    3 years ago
    Quoting Grease Monkey on 04 Nov 2022 04:04 AM

    Because she got me beer I cleaned her, doesn't happen often, now I remember why....

    Quoting 408 on 04 Nov 2022 04:09 AM


    What were you doing with the sockets ?

    Quoting tussuck on 04 Nov 2022 05:15 AMedited: 04 Nov 2022 05:16 AM

    Guarantee that the 10mm socket is missing to by the looks of things!

    Luckily I needed the 8mm lol
  • John.R
    John.R
    3 years ago
    Had 1/3 of my EasyR order, which thankfully included a curved number plate bracket for the FXR as I stole the original one for the LRST. 

    Fitted that up and went out and took more pics. Loving the motor on that thing. 
  • Soapbox2627
    Soapbox2627
    3 years ago
    Had a look at it on my video camera’s, playing baseball on the Gold Coast at the minute, darn floods made us catch the plane up, we were keen on riding up
10/52