home mechanic

  • fabien
    fabien
    7 years ago
    any knows a home based mechanic to work on 1999 softail evo ? I 'd like to learn some basics as well , may be retired harley tech could make a few bucks !
    North east Melbourne.
  • steelo
    steelo
    7 years ago
    Good idea. He could earn 25 bucks an hour at home from you instead of $120 an hour working at a dealer. And he gets to show you how to fix and service your own bike so you can do it yourself. Let’s get a list together. 
  • Daggs
    Daggs
    7 years ago
    Steelo... Dealership might charge $120 an hour mate but there is no frigging way the mechanic is getting $120 an hour, are you for real?? 
    You don't know much if you don't know the difference between charge out rates ansd employee wages...
  • chriso
    chriso
    7 years ago
    Fuck me, you blokes are a cheery bunch lol
  • Bonkerz
    Bonkerz
    7 years ago
    If you find a mechanic that'll work for $25 an hour let me know.
  • steelo
    steelo
    7 years ago
    That’s what I said. Let’s get a list together. Thanks daggs for pointing out the bleeding obvious. Knuckleheads. 
    Actually. You wouldn’t happen to be a retired Harley tech would you? 
  • tussuck
    tussuck
    7 years ago
    Okay, back to the original question.
    In all honesty your better off to buy a good Service Manual and start somewhere simple - none of this stuff is rocket science.  Buy the basic tools and then over the course of time the remaining specialist tools etc and just get stuck in.  A home mechanic is going to tell you bugger all as your trying to take food out of their mouths so to speak.

    There is not a lot  needed on the old Evos anyway so if you have specific questions just post them up here and you should get some solid honest responses.
  • Sparra
    Sparra
    7 years ago
    My take on the OP's question was that he is looking for someone to come to his house and help him work on his bike and to show him how to do things. Not turn up with a truck load of expensive gear but to use the bike owners tools and point him in the right direction as far as general maintenance and servicing goes...Some retired tech's who are bored sitting at home and on a pension would maybe jump at the chance to make a few extra dollars and help someone out at the same time...Finding them by posting on here will be a little harder I think.
  • AlHD48
    AlHD48
    7 years ago
    Diy bro. All part of the fun satisfying and cheaper. 
    Just het the service manual and the correct tools.

    Youtube helps too
  • tussuck
    tussuck
    7 years ago
    I’m out east melbourne and have worked on Evo’s for 30 Year’s so would be willing to help out a fellow rider from time to time. I have done pretty much all the jobs on an Evo that you need so can certainly give guidance, advice and help. 
  • brucefxdl
    brucefxdl
    7 years ago
    top stuff tussock.
  • Daggs
    Daggs
    7 years ago
    Yes well done tussuck.
    DIY is very rewarding but still you need a pretty reasonable tool collection and definitely a workshop manual. As stated there is a vast knowledge base out there to help you be it YouTube, this forum or a couple of the Yankee forums but you really need a bit of mechanical experience too.
    Some people seem to think it's fine to work on their 25k plus harley themselves even if  they really have no idea what they are doing but they wouldn't dream of touching their car themselves.
    But ask away here, plenty of experience amongst our members. Good luck