Hi All

I need some help please, I stripped one of the Screws from the handlebar switch housing one goes at the top the other goes in the bottom and was wondering where can I get my hands on some replacements, I tried Harley Davidson Davidson with no luck

Could anyone at least tell me what size they are, It's A 2015 Street Glide if this helps

Cheers Darren

try easyR on ebay, you need swithblock hardware.

Just take one out of the other side and if it's the same length go to a fasteners shop if easy r has them thay will be
10 times the price and take weeks for you to get them

measure da depth of da hole & use a full lenght screw even if ya have to cut a longer 1 down to suit do that 1 up 1st then da good 1 last . that will close up da gap 1st & give more thread contact with maybe some 620 loctite , if not just replace da part with original equip , not that aftermarket chrome shit you will be sorry , don't devalue ya bike with tiwain crap that does not work 

 

stripped the swithblock srews, have to try hard to do that.

Not really dicast vs steel screw /fine thread thay can strip easily more so over time if thay have
Been undone a few times

Trying to do em up too tight to stop them turning?... It's the clutch & brake lever housings that stop the whole lot from twisting on the bars, not the switch housing screws..