Fitted the Bypass to the Softy and made an oil pressure gauge up outa some fittings to see what its doing to the oil pressure

well it has a Hot idle of 22psi and seams to hover around 45 t0 50psi out on the road at high rpm or low rpm

This the bodged up gauge
[URL=http://s307.photobucket.com/user/Ando1450/media/WP_002550_zps94f20e2d.jpg.html][/URL]

This Hot Idle

[URL=http://s307.photobucket.com/user/Ando1450/media/WP_002560_zpsfa1a7bfa.jpg.html][/URL]
[URL=http://s307.photobucket.com/user/Ando1450/media/WP_002556_zpsd492286e.jpg.html][/URL]

And this is cruising around the streets

[URL=http://s307.photobucket.com/user/Ando1450/media/WP_002554_zps95f7725c.jpg.html][/URL]
[URL=http://s307.photobucket.com/user/Ando1450/media/WP_002552_zps92230f28.jpg.html][/URL]

Is this a good thing ??????

it better be

I have oil pressure and temp gauges on my bagger and there worth the money to know what the engine is doing through the summer months.

I have oil pressure and temp gauges on my bagger and there worth the money to know what the engine is doing through the summer months.

perfect for a tc evos have less around 13 psi  idle  35 psi  on revs hot

some times even lower on relly hot days/traffic

 

 

if your worried ando look up ert products they make up hotrod kits for harley oil pumps and have some good info on there site

 

sounds like a lot of pressure for roller bearings Ando?

 

What oil pump are you running ?
Pretty close to the newer SE high volume oil pumps, maybe a bit higher.
Do you know what the pressure was before ?

depends on oil grade & temp  cold or hot