Hi, been out doing some smart tunes today with SEPST tuner. Not 100% sure what I am doing though interesting trying to work it out.

Noticed in the Tuning setups that the ACR and EITMS are both disabled, should these be enabled? I am pretty sure the 2012 Wide Glide has the ACR's fitted, the base map the dealers put in have these disabled as well.

 

Nick

EITMS is "parade mode" only for slow speed hot running.Engine Idle temperature management system

I "disable" it on all the bikes I work on in Perth WA

ACR's should be enabled only if the bike has Auto compression release fitted

Bikes either have them ex- Factory or don't , VERY few folks ever fit them to their bikes 
 
What is not good is if the bike does have them and they are disabled in the Calibration

Leads to a "hard start" syndrome , and I have seen that on a coupla bikes before now

Thanks Retroman, I will enable the ACR and leave the EITMS disabled. The manual for my bike says the ACR's are fitted to the 103 and larger engines.

I havn't had any issues with starting tho.

I was playing with my uncles 2012 switchback and he had a HD download Cal and it had the ACR's disabled aswell

he had is bike back a coupla times with hot starting issues and even a battery under warrenty, they told him there was nothing wrong and that the battery was a random thing

dipshits just needed to turn on tha ACR's

Thanks Ando, I've just been out and reflashed the map with the ACR enabled.