I have a 2011 FXDC, I was riding home and the engine light came on and then stopped. Now it will turn over but wont start.  I have got the codes

P0261 front injector open/low efi

P2063 rear injector open/low efi

P1003 system relay contacts open efi

U1016 loss of ecm serial data

Can anyone help with what the fix is for these.

Thanks

jimmy

 Gedday JimmyMc !!

I gotta 2011 FXDF that threw up similar codes wich led me to the "system relay" and "starter relay" Turns out the black relay was stuffed from taking in water. Replaced them both black and grey and problem fixed !!!! $16 for both from HH. Hope this helps ya out bro !!

Cheers Kev

Does your fuel pump kick in and stop
Or keep running?

Ol mate has posted this thread in w/shop also.
Already stated pump not working.
Hate it when they do double threads.lol

Rodder, it is a bit hard for me to drop into a dealer as the closest dealer is 1800 km away, I live in Port Hedland WA. so not so easy, I will be calling them tomorrow to see what they will do but it is sounding like an easy enough problem to fix, well I am hoping it is.

Sorry Carbon Fibre for putting it up twice, wasnt sure which would be the better place. as not everyone looks in all sections and threads. but thanks for your help also.

Check my post on ur other post. May help'ya get going,

Got hold of a new relay the black one. replaced and away she goes again. Thanks for your help guys. I spoke to a dealer today about the other code for the ecm and was told that this would come up if the bike is turning over and wont start.
I am glad it was only a easy fix.

Thanks again

Sweet
Might pay to get a spare one, as they're cheap. Get some dialectic grease and cover terminals to keep the green death at bay. Always a good service job to pull all fuses n relays n recoat with proper grease.
Glad it was an easy fix, especially being up in Hedland.