Hi guys, I've been contemplating cleaning up those unsightly wires on my handlebars.  Just wondering how to disconnect the wires from the front blinkers. I don't want to have to cut and rejoin the wires.  I don't care how long it takes me to do it, I just want it to be as professional as it can be. I've done a little search on the web, but most of them just cut the wires. Any tips disconnecting the switch wires, are their any plugs to disconnect? The bars already have the holes provided for hidden wiring.

Cheers in advance.

Tank off and using a wire terminal tool (approx $30) to remove each wire from the connector then you will need to route the harness through the bars and reconnect.

Doable, tedious pain in the ass of a job but the right way to do it, if you have the patience.

Mount ya indicators onto ya top triple clamp

Indicators look shit on ya handle bars

Not the best pic

 Cheers for the comments so far guys, I've got plenty of patience, so it shouldn't worry me.