Hey guys. Just trying to figure out if this is....legal!  It's an all in one rear license plate bracket, with an LED strip at the top, and integrated turn signals. It's also curved. My plan is to drill it right on to my rear fender. 

 

Will I get busted for the turn signals this way?

 

m.youtube.com/watch

From the National Transport commision, Vehicle standards:

103 Location of direction indicator lights

(1) A pair of direction indicator lights fitted to a vehicle must have the centre of each light at least:
(a) for a motor bike or the single wheel end of a motor trike
— 300 millimetres from the centre of the other light; and
(2) The centre of each direction indicator light must be at least 350 millimetres above ground level.
(3) The centre of each light in a pair of direction indicator lights required to be fitted to a vehicle must not be over:
(a) 1.5 metres above ground level; or
(b) if it is not practicable for the light to be fitted lower —
2.1 metres above ground level.

Ok. So based on 1a, it's not legal.

Thanks for the info!