If you link the park light wire to the low beam wire[I just used one of those connectors that you put both wires in side by side and squeeze] you then have,  single low beam and park light. When you hit high beam, high comes on and low beam stays on which gives you two on high, still with ADR   "E" on your lens.

 

 I got the same problem got the correct plugs but the high beam stays on and the security  red light stays on also In the dash ,I have ordered some more h13 connectors from the us so hopefully will fix the problem

 Slugg, have you done that mod to the lights ,and if you have any problems

I just came home was ridin back from Byron to home in dark light on ,my low beam is bright as and wide thought I was on high beam well not by blue light on dash so I went 2 high beam ,seemed worse in brightness and was crap so went back 2 low huge wide bright as ,has someone possibly changed filament me thinks coz how can low beam be better than high ,or is wiring in switch or harness back the front jus seems odd 2 me or is that how it is SHINGLES

331020210776
eBay now $180
It has his phone number too

G'day Fellas, Bought the Domestic assembly from peter stevens today and Go series plug wire harness cost me all up $320. $280 for the assembly and 40 bucks for the plugs including shipping. Thanks Heaps for the help guys. Hope i wont have that issue with the hign beam light stay on the dash

Cheers

Shane

No you will be right dreamer.