where is the best place in qld to het head work done

Melbourne!

Give Fred a call at Pro Cycle Dyno slacks creek 3808 4003.
Not saying he is the best but worth talking to

Bush industrys racing Bundberg QLD Gary Thomas ph0419685883  0741525547 gary has the only flowbench in bundy

 There was a guy that worked for m&w Dave Stephens was the name built stout runing sportsperson. & did heads. Probably still around up QLD.

 Forgot there is also a guy up @  Mackay who a friend of mine talks highly of but that's NQ could find his name if u  want 

Don't know in Queensland Paul Hallam in melbourne did mine and very happy he's very helpful full of imfo and easy to talk to address below also when you get round to Dyno give Fred at Pro cycle a call , I can highly recommend him he ran my bagger over the dyno and its exellent .

Hallam Boyz Pty Ltd
255 Gherang Rd
Modewarre, VIC 3240, Australia Fred

Pro Cycle Dyno slacks creek 3808 4003

Talking to Pro Cycle today and he now sends his out to some one in NSW

He Ozymax stick with Fred at Pro Cycle mate he knows what he's talking about be guided by him !!

yes mate I have confidence in his work. I cant remember who he said he sends the heads to.
He did put me onto a local guy to do the bores who also does heads but Fred suggests the other guy is the go for head work.

yeh that be good go down there for work some tomes would save me fright thanks

duck747 mate gary thomas did your heads with glen

 Yep and they bored out the throttle body also. Hows that top bike of garys going?

2000 hp crazzzzzy

 I can't recommend Glen from highway motorcycle repairs Bundaberg enough. Glen used to get Gary to cut the valve sets that's all. Glen now has a machine and does the seats himself. It's the port work he does that's so good and takes all the time. My 106 does 115hp @ 120tq. 585 cams. Everything else is stock. Dynoed on sercos dyno. Go see Glen he rides a harley and is a great bloke. He won't take credit for other people's work. Credit where credit is due. My 2cents. 

Many times. Best yet at benaraby is 11.42@117. Standard gearing.

got a old evo engine apart at the moment and looking for someone in mackay or queensland to check piston ,bore clearance a hone if i can get away with and then give the heads a freshen up guides and reseat values etc. old mate doesnt want to blow a fortune just the basics anyone know of anybody that would do this work for realistic rates

new to this forum so i hope this uploads ok