Look at the andrews 57h cams

I have fitted a set and they make an excellent difference wher ya look at

http://waharleyriders.myfreeforum.org/about423.html

http://waharleyriders.myfreeforum.org/about444.html

and check out Thundertech in mundaring if ya looking for a mob to do the work

 i depend's how many part's they are going too replace , when i do a job i replace the cams + 4 cam follower's ,  2 timing chains + 2 cam chain adjusters shoe's  + gasket's  & i go in thru the top of the engine & use the stock pushrods , not go in thru the side & cut out the pushrods & fix those ezi install pushrods  thats the lazy way

 Fattywa, if you put the 204's in I'd be real keen to hear what you think of them..

Ive got em in my 103 with 1.725:1 rockers. Goes well!

I looked at the 204's for my 103 but ended up going with the 254E cams instead because I was staying with stock compression and rockers.

Baloff I am happy with the 254E cams but I don't really have anything to compare them with other than stock (on my bike) and 255 cams (on another bike). They definitely give the bike more grunt for what that's worth.