Hi Lads,

So I changed out my bars on the weekend - all good - but in the process I broke the clip on one of the multi plug that controls the indicators etc and the bastard has come undone, so now I need to pull the tank.  I could just tape it up but thought... if they are easily had, I would just replace them.

Anyone know where I can get these - and what they are actually called?

They are these ones...

 

thin cable tie between the wires around both plugs

I've repaired plugs that pull apart easily before, by using Electrical shrink wrap.
Buy some that you can just slip over the plugs, grab a hair drier, heat up the shrink wrap, wrap shrinks and no more plug coming undone.

Perthogs suggestion does work too, but I find the shrink wraps, more robust.

 You could also go to JayCar as they have a lot of plugs some that are semilar to Harley style as well.

Thanks lads,

I have taped it up for now, but I need to do a better job. The problem is getting to the bastard! I can get the tank back a bit, but ideally it needs to come off.

I will get some new plugs and the next empty tank ( i just filled it) I will rip it off and do fix it!

Mongrel when ya take your tank off next do what I did

Get some more fuel hose a T peice and a plug make a drain line for next time, I just cable tire the drain line from the T to the frame down tube

Ando! Great idea!!

cant see properly if its a 6 or eight pin here is a eight pin, its a bit differant but will do the job.

http://www.ebay.com.au/itm/DEUTSCH-BLACK-8-PIN-DT-CONNECTOR-KIT-EASY-CRIMP-TERMINALS-HARLEY-CAT-AUTO-/221143030724?pt=AU_Car_Parts_Accessories&hash=item337d26dbc4&_uhb=1#ht_4550wt_1163

 another type

http://www.ebay.com.au/itm/Deutsch-DT-series-8-pin-connector-kit-waterproof-green-strip-grey-/130681973959?pt=AU_Car_Parts_Accessories&hash=item1e6d40acc7&_uhb=1

http://www.ebay.com.au/itm/Deutsch-DT-series-8-pin-connector-kit-waterproof-green-strip-grey-/130681973959?pt=AU_Car_Parts_Accessories&hash=item1e6d40acc7&_uhb=1

ANDO - Where do you put the T-Piece? Mine has the quick release fuel connector.

WILL - They look good, but I would have to change both, as they have different clips to hold it. But thanks... I am getting closer.

Ok - Found what they are. They are a Molex MX150. Just need to find them local - Should be easy enough!

http://www.ebay.com.au/itm/1-Harley-8X-BLACK-MALE-OEM-Molex-MX150-connector-terminals-switch-wiring-07-up-/260875596557?pt=Motorcycles_Parts_Accessories&hash=item3cbd65b30d&_uhb=1#ht_3793wt_1044

Not the fuel line to the injectors but the crossover line under the front of the tank, stops fuel pissing everywhere when draining the tank for removal.

Ahhh! Clever!! I will look into that for sure!

To save me looking it up - do know the size spec on the line?

Cheers
Mongrel

good god ....u want everything dont you lol
its about time to see a go-pro on this fat my boy now you have your apes
and thanks for the idea of the plumbing chrome cable