Hi I am confused on which cams to go with ??

I have a Deluxe 2012 with S&S slip-ons and SE stage 1 upgrade. 

 
I am looking for torque and hp increases in the 2000 to 5000 RPM range don’t tend to ride above speed limit, more looking for overtaking and 2 up power with sharp throttle performance thru the gears. I am not planning any further engine mods.

So you guys that have just done your cam please advice on what worked for you?? Could also be talked into V&H stagged big shots??? Instead of the S&S sip-ons but been told going V&H I would lose power…

So Far my thinking is S&S 583 EASY START ??? or SE 255 but I hear they run very hot in the summer?

I have just installed the new Andrews 57h. According to Andrews they are designed for the RPM range you are speaking of.

Mine are in a 96Ci but they are listed for 103 too. I can tell you that I am very happy with the bike, and I have only dropped in a base map with my TTS. Once I do some Vtunes, I reckon I am going to be smiling.

One thing I am really happy with is the idle. I reckon the EFIs idle too "nice" - now... my idle is tops!!

 I am unsure which cams to go with S&S 510 or 583

could sum one explain why one would be better over the other ?? and which would be the better cam...

 

 

cam	Valve Timing (open/close)		Valve Duration		Valve Lift	Centerline		Lift @ TDC
	Intake	Exhaust	Intake	Exhaust		Intake	Exhaust	Intake	Exhaust
	Open BTDC/Close ABDC	Open BBDC/Close ATDC

 

510

20°/38°

52°/20°

238°

252°

.510"

99°

106°

.187"

.178"

 

583

5°/18°

58°/24°

203°

262°

.583"

96.5°

107°

.113"

.206"