TTS - For those that are still waiting

3/3
  • fatbat
    fatbat
    12 years ago
    Well after many of the US dealers stating they didn't have stock of the new TTS, I went to mastertune direct who suggested I contact one of their dealers in Qld who just took
    receipt of a batch. I called this shop - friendly service but I was surprised to hear that the TTS price is marked-up from $445 USD to $545 AUD. The cables are marked-up even more.
    When I asked about the mark-up I was told it was for warranty and support that I would otherwise not receive if the TTS was purchased in the US.
    The shop in Qld has stock, as does Mastertune, so I will make a decision today. I am still awaiting confirmation that the new TTS has a dongle to log/record Vtune data as I would
    not be inclined to lug my laptop around.
  • fatbat
    fatbat
    12 years ago
    Thanks Boris. That is a bloody good price - I just hope it's the new version and not the old at that price.
    I have sent them an email to confirm and if it's the new version I will buy from there also. I had a look around their store and will also buy some other well priced goodies.
  • Gonads
    Gonads
    12 years ago
    M&M are pretty good place to deal with.

    Stuff paying extra for warranty and support, Mr Cole is pretty good at helping out with both anyway.
  • HogBag
    HogBag
    12 years ago
    Thanks Hilly ole check it out
  • fatbat
    fatbat
    12 years ago

    Just ordered my TTS.  Can't wait till I get it and use it.  I'm hoping even a base map will improve the bike.  I'll have a go at carrying a laptop around and v-tuning it but curious if there are shops around (in NSW/ACT/VIC) that will tune using it?

  • Sparra
    Sparra
    12 years ago

    My TTS turned up today,I installed the software onto my computer and started to play,so far it seems pretty easy but it is only early stages...I have backed up and saved my original ecm tune and am looking for a tune to download that is for a/c and 2into1 pipes...The only maps I can find in the software that look similar are for touring models and mine is a Wide Glide...the 2 maps are...CPZ176-03 and CQD176-03...These are both for a/c and touring style exhaust...Would one of these do for a base map or does someone know where to get a map for a/c and Bassani Road Rage 2 into 1...I have emailed Bassani but they haven't responded...

     

    Cheers...Sparra

  • Sparra
    Sparra
    12 years ago

    Thanks Hilly...I'll give it a shot....

    Cheers...Sparra

  • JayD
    JayD
    12 years ago

    I recently purchased the new TTS Mastertune 2 unit for my 2012 Street Bob loaded the software and ran the updater all worked fine. Next step was to find the base calibration to suit my set up S&S Stealth A/C + Vance and Hines Big Shots Staggered. The manual indicated the starting base calibration was CQD358-01, I went loooking for this calibration and was unable to find it and could only see the earlier levels of calibrations to suit non CAN bikes. I have run the updater a few times now and it appears to working fine with a recent version update for Mastertune 2 downloading with out a problem and all other filed showing as up to date. I had contacted TTS directly and was informed that the updater did not have all the updates on it yet. It has been another 10 days with no sign of the base calibrations to suit the CAN bikes.

    I need to confirm if I have a problem or the base calibrations are just not available yet to suit the CAN bikes. Cany anyone please advise?

    JD

     

  • fatbat
    fatbat
    12 years ago
    Just got my new TTS in the mail yesterday but haven't had a chance to play with it yet.

    JayD, have you considered using one of the Kuryakyn base maps for exhaust and air cleaner?
  • JayD
    JayD
    12 years ago
    The Kuryakyn maps online are level 176 calibrations which are not suitable for the CANBUS bikes due to differences in the software.
    I received feedback today from TTS, there is a hold up from their end which will be rectified in the near future.

    thanks
  • Steve Cole
    Steve Cole
    12 years ago
    Yes, there has been a problem on our end getting all the CAN calibrations on the updater. They will start getting put up tonight and get added to each weekday until we get them all up. Had an issue with the updater on our end which we believe to be solved properly now so we can start getting them up there. Sorry for the delay on them.
  • Sparra
    Sparra
    12 years ago

    It's probably obvious but can someone tell me what a can bike is??? And are there going to be any maps for air and 2 into 1's on a 2010 96???

  • Sparra
    Sparra
    12 years ago

    Thanks for that Hilly...Not stessing mate and have already loaded that map after you told me about it before...As soon as I get some spare time I'm gonna give the v-tune a try and see how I go...

     

    Cheers...Sparra

  • JayD
    JayD
    12 years ago
    Thanks Hilly I downloaded tonite still no base calibration to suit a stage 1 2012 fxdb I have emailed tts to see if I can use another calibration to get me started hope to hear something overnight.
  • JayD
    JayD
    12 years ago
    Hilly, yes pipes(V/H BSS) and a/c (S&S Stealth) only.
    I heard back from TTS this morning. Was told i could start with CAA358-01 and work through the Vtune process
    I loaded the base calibration this afternoon and did the first Vtune run tonite, all seemed to go ok I loaded the new tune from the Vtune run and will do another run tomorrow.

    JD
3/3