Any info/drawings etc on where to cut the pipes to remove the cats from a 2010 DX. Then i'll get the pipes re tigged back up. Thanks guys
i have a dog that will get rid of them cats for you , he's a stumpytailed red hall's heeler, no worries
the BITCH red stumpy has just had 6 puppies only 1 week old , all halls hellers so we have 9 stumpies here ,do you want too buy 1 ,
i have done this mod to the exh before a few times , you straight cut across the guts very neat it's a bit hard too clean out because there glued in but you can do it no prob's just clean all the old glue out proper , the cat metal is worth scrap $ like 50-80 bucks , do not breath the dust wear a mask , then tig weld neat & narrow i just paint a thin strip of silver paint down the weld & screw the chrome cover back on, you would never know . or you can buy a yankie model header pipe they do not have the pussy cat in there header buy they could be 500-700 buckaroonies,
don't forget too wear a mask, & clean out the glue stuck to the inner walls wire brush on a drill etc i polish in there smooth with sandpaper scrolls & finnish off with very fine with some kero, you might have to re-tune the bike it might come out a bit lean mixture that will make her run hot , our puppies will be on the trading post & the land newspaper.com next week we start to add them @ 2 weeks old & take dep 1st so by the time 8 wks are here we make sure the people still want them or i give the dep back too make sure they go to good homes etc , just like you would not sell your bike to someone who could not look after it ,
these dogs are the true stumpytailed halls heelers as they have some dingo in the breed, my males grandpappy was a 100% dingo both dogs are from working farms , very keen & loyal the last lot 5 out of 7 went to farms as pets & watch dogs we have had reds since 1983 we spoil them as the puppies a born in the lounge room in the basket & the mum is hand feed the puppies are very fat & strong
