• Gday , can anybody tell me if a 1/4 inch offset sprocket will clear the inner primary case on an evo !!
• Cheers.

s

i pushed the wrong button,      sprocket should go on as the front pulley is alot wider than that sprocket . but not on a very early model  like 1984 -86 type ,    in testing use modeling clay as a dummy run check on inside of pri cover ,    just put oil on 1 side so it does not stick & pull  so the measure is correct

Thaks Daddy racer!! i ll check it out.

 

Ok after checking this out , i noticed that the existing pulley is much larger in diameter than a standard sprocket , and with the inbuilt recess in the pulley it misses the casing pretty easy. The sprocket being smaller with a smaller recess out of the face of it looks like there is only about an 1/8 of an inch spare.

Anybody know if a 1/4 inch offset pulley will fit!!

Cheers

Come on , somebody must know the answer to this question!!