Guys and Gals
I want to remove the reflectors on my 07 custom sporty.
Iam not too worried about the ones on the forks, but I am not too sure about the ones on the rear guard.
Iam worried that it my damage the paint work.
Any ideas or methods to remove them without damage would be a great help.
Thanks in advance
Cheers
Paul
I've read somewhere on this forum about using some very thin string like the floss you use for your teeth.
When I took mine off, I pried it off just using a a screw driver with a cloth behind it- very carefully and
afterwards used a bit of degreaser to soften the the left over of the double sided tape and clean carefully.
G'day Paul, just did mine, the fronts I heated up with a hair dryer, then using multi grips, just prised em away, place some cloth on the back / under side that you are pulling to wards so as to not harm the surfaces, then I just rolled the double sided tape off into a ball. No residue to clean off & no marks on the paint.
Good luck.
Yeah got rid of mine with a hair dryer and some light weight fishing line.
Guys & gal
Thanks for your suggestions and methods for removing my reflectors
As sugested I used a hair dryer and fishing line and it worked at treat..
Thanks again
This forum and the members of it are great.
I look forward to reading and posting many more posts in the future.
My rear amber set were simple bolt on jobbies beside the number plate, the set on the forks stood seeing they are all black, once they were removed it cleaned up the whole front end.
I undestand what you're saying about being seen, on my last GS I had never thought of removing them as they suit the rugger'ed look of the bike, but I figure if the cage drivers don't see me then a small reflector ain't gunner make any differance.