Paid $720 delivered for the HHI 4 degree trees. From Rollies.
Just noticed in your pic Spero, that the front brake line and abs wire is not connected to the bottom triple if I'm seeing right ? Did you end up finding a way to hide that better or just running it as is ?
Hey Ben, yeah i've removed the standard lines & are now running Magnum braided lines which don't need to bolt to the bottom of the lower triple tree. I will try & take a pic of the front of my bike showing how the lines are configured tonight so you can see..
It's going great Mongrel! I still haven't done the fall away test, I just did the steering head shaft up nice & firm & the bike handled fine so I left it at that. I'm going to pull the whole front end down soon just to check the bearings etc, I'm also thinking about machining a bit off the end of the shaft to allow me to tighten it a little more now the bearings are worn in..
How's them cam's going?? I've been following your post on them, I reckon you've convinced me to ditch the Screamin Eagle cams & go with the Andrews 57H..
Hey Ben, here's a couple of pics of how i've run the front brake lines. I'm pissing the ABS off in about two weeks as soon as my new brake line arrives, if you're running 6" rise drag bars these lines will fit ya ride, if you want them $20 & postage to you & they're yours.. They're only about 6 months old..
Ah yeah. Looks tops Spero ! Thanks for the pics.
Hows the ABS removal work ? can it be disabled so the system doesnt recognise it or you just going to live with the light on the dash ?
