Will be getting the new front fork sliders in the next day or two and have new springs to fit too, I have a workshop manual but as I have never pulled a front end apart just wanted to make sure it was done properly so I was hoping some knowledgeable good hearted forum member in Perth can set me on the right track for dismantling and reassembly, just didnt want to pull apart and find some bits left over   I welcome any tips or advice from other forum members too   Once I have done it for the first time I will be right from there on, thanks in advance boys.

Mainey, see Bretts thread on race tech tips or pm him cause he has pulled his front end appart.

Mainey .they are a very basic fork assembly [about on par with early 1980's jappa forks] scotty's correct in sayin the manual makes it sound harder than it is. Don't forget a 12mm allen key,the ones with a 1/2'' drive to fit your ratchet are the go. Take your time and give us a yell if needed.

Thanks a whole heap Scotty, thats what I was looking for, yeah the manual makes it look harder but the pics are sensational, and thanks uncle, red and brett for the replys.