Online: softfat, Merv

Passing Lamp Bulb Upgrade

  • pedrod59
    pedrod59
    14 years ago

    Hi,

    I have a 2010 Fatboy with passing lamps fitted.

    It currently runs H3 35 watt halogens bulbs in the passing lamps. I want to upgrade to  brighter 55 watt bulbs.

    The question is; will my electrical system run this extra load?

    I am not sure what the output of the electrical system is. Would I be overloading the charging system?

    I am still running the standard headlight,  H4 60/55 W. I will be changing the halogen headight bulb to a brighter H4 60/55 bulb ( Phillips X-Treme Vision) very soon, too.

     

    Thankyou

     

    Cheers

  • rider
    rider
    14 years ago

     

    Charging system will be more than covered.

    I'm prety sure the 2010 twin cams run a 38 amp alternator now.  and a 40 amp main fuse.

    At 12 volt X 38 amp = 456 watts

    At 13 volt X 38 amp = 494 watts

     

    High beam          60 watts

    Passing lights  110 watts

    tail light                   5 watts

    stop light              21 watts

    turn signals         42 watts

    ECM/fuel pump   20 watts

     

    Total =                 258 watts = 21.5 amps

     

    ( leaves 198 watts/16.5 amps to spare at 12 volts, a little more at 13 volts)                       

  • als1200
    als1200
    14 years ago
    gday, with your h4 phillips have just released the new plus 100, i havnt tried them yet (we only got stock this week) but i am running at present the crystal vision (very good). never tried the plus 80 but my rep did in the company car and didnt like them.
  • pedrod59
    pedrod59
    14 years ago

    Are you running a relay with the passing lamps?

     

     

    Cheers

  • rumman
    rumman
    14 years ago

    i have been running 55watt globes in the passing lamps on my heritage for 18months with no dramas.