16" apes barnzy?

 Ya can't have everything Dave ha ha. Hope night shift is treatin ya well... wait on you're underground, it's always night

yep dark as mate dark as 4 to go them home ya fukn ya

Quirky.. is that a US model, or did you remove the uggliest brake light in history?

Hey guys,

Thought I would show a pic of my bike. Have only had it for a couple months and its my first Harley. I wanted to customise one a bit so I bought the Street Bob and so far it have a SE Stage IV stroker kit which makes it 113ci. It now goes hard and it due to be booked in for Dyno this month to get the full tune and dyno numbers. It insane with the V&H pipes haha. I put some Roland Sands 16"apes on it with 2" risers, forward controls, progressive rear shocks, edge cut black billet levers and a side mounted number plate.

In the next month or so I am going to get my edge cut black billet pegs, grips, shifter arms and levers all put on (already purchased sitting at home) along with some goodies for the front brakes as I think they leave a lot to be desired. I am also going to get a softer spring on the rear brakes  as well as a tooth lower in the front sprocket.

Also deciding, however I think I will order some wheels from HD Wheels in Cali. 21" front and 18 rear and going to put a 200 rear tyre as has just been done recently on this forum I see. Pretty sure I am going to get the matte black rims as I think they look nice and are a bit different...

Being my first Harley I wasn't certain how much I would love it but I have been having a ball, the mrs likes it too although the pad I bought her to sit on gives her a sore back lol. I am also interested in different tank decals but haven't found anything I really love yet.

Keen to just do heaps of riding but as yet haven't met anyone off here but I will keep my eyes peeled on the ride section.

Thanks for looking.

Fuck me, it WILL NOT load my pics!

 

 

Hey StevieBoy, that is one sweet SB. Who did the stroker kit for you?

Nice looking bike StevieBoy , how does it handle with the big bars on ?

Thanks Darren! Frasers Concord did it for me. I dont think they had done a lot and they had their some head Harley guy do the whole thing. There is a dyno comp on next week they have asked me to go in but it hasn't even had the tune yet. They were pretty proud of it when I picked it up, it sure is a lot better than std!

Thanks 92. When I first picked it up it was a bit weird tho but now I have to say I totally love them. You of course ride them differently but I reckon it's easy to get into a corner and dump it on its side and power out. Starting to ride it harder past people you get some pretty funny looks. Lol

So where's the tail light and number plate???

Stevieboy,
You didn't used to own a Hyosung 250 with apes etc did you.
Ride Safe
Nigel

78Gold not sure if your taking the piss or not but never owned a Hyosung haha.
I've owned and raced lots of Jap 1000's so this is a first for me. Sparra ill take a picture and show you mate.

No mate not taking the piss.

Had a mate of me sons who did up a Hyosung while on his L's and P's, had apes, blacked out here and there.

I thought it was a pretty cool looking learners bike.

Havn't seen him for a while but I knew he had updated now on full licence.

I just know he would love the style of your bike, so hence the question, there can't be too many Stevie's out there.     or can there.

I am old so please excuse with my senility. lol

Ride Safe
NIgel

 

Sorry guys a duplicate post.

Not only senile I am getting impatient.

Ride Safe
NIgel

hey stevie just a quick question mate,
how did u go fitting those bars since u have abs, what did u need to change.
im interested in changing mine on my 2013 street bob aswell.

you will need a new lower and upper brake line. the good thing about that is any future bar changes you only change the upper line.

ahh fantastic thanks heaps ozymax. the lower on is easy enough to change over yeah.

yes mate but be very careful with the fittings for the ABS lines, go get some open end ring spanners.
The dealer will tell you that they need to do it as only they can bleed the ABS system. I have had mine apart several times with out issue. When I do it I fill everything up with the bleed nipples all open. Then I vac it through. I never use the leaver, that way any air in the system won't get pushed into the ABS lines.
Works for me at least. But is your brakes so it's up to you to decide.

Well i have been lurking for a while now and not posting much, thought i better get some pics up of my dyna i picked up a few months ago after selling the sporster at the start of the year.

 

its a 2007 street bob, everything has been modified on it pretty much

has a 120r screaming eagle motor with all the good bits bolted to it, wide glide front conversion, twin six pot brakes up front and 4 pot up the back, wilburs custom forks and rear shocks, 180 rear tyre

it goes like hell and is the best bike i have ever riden hands down

just cant wait until its warm again down here in tassie to get it back out onto the road

 

[URL=http://s14.photobucket.com/user/timbocruiser/media/1001458_10201225283855304_1530363341_n_zps1c561f08.jpg.html][/URL]

 

[URL=http://s14.photobucket.com/user/timbocruiser/media/487613_10151587192541030_201551463_n_zps58922429.jpg.html][/URL]