Hi

I did my first Vtune run today. This was a sert that was upgraded by tss

tuning run
start in 1st gear  from 20km hold each 5 sec 5klm increase to 80klm

second gear  from 20klm hold each 10 sec 5klm increase to 110klm

ride in other gears at various speeds hold for 5 secs

2nd run hit count attached as bike idles at about 1100 no accurate measurements below that

have i gathered enough hits in order to have some useable data

i tried smooth ride and hold for at least 5secs each 5klm increase in 1st and second gear

i have put original map back into bike asi have not yet started to merge any cells

2nd tuning run recording historgram 2ndrun20032010.gif http://www.box.net/shared/raa8gnfoc2
2nd tuning run  E176-002-B1-1st-003.MT7   http://www.box.net/shared/o37qtqatzj
2nd tuning run 2nd vtune 21032010.xls http://www.box.net/shared/pq54eooen1

any advice would be appreciated

Harleynt - novice in Tuning

Hi Scotty
thank you for your quick reply
I did create a new map(1) from the first run
and used that in the second run
as we had a storm i was unable to do a third run using the newly created second map
the attached files were from the second run which used the newly created map(2) from the second run
am i supposed to use the original map withe the vtune from the second run
i used the newly created map(1) to create the new map(2) with the vtune data files from run 2 run but havent as yet done the thrid run
What can i do to get more hits in the yellow areas or do i really need them
and will i get lesser pink cells after my third run
when i decide to blend cells (after the third run) where do i start as the yellow cells have had some corrections done

Scotty thanks for that
will do a 3rd run next weekend
and post the relevant maps then

Do I need to do anything about how hot it runs
esp at idle

I'm just curious...how did the cells in the "0" throttle range get so much data that high in the RPM range?

Hi
I did my 3rd run today
i also created a blended file in excel
i blended cells that were either white or light pink
both files are linked below
I would appreciate any comments before i change the mt7 file and upload it to my bike
Thank you to all for all the help given to me so far
Harleynt


vtunedata-003-230310.dm3 http://www.box.net/shared/4o3q7ggt5v
ae176-002-b1-1st-004.mt7 http://www.box.net/shared/srj7r9vesj
3nd vtune 230309.xls http://www.box.net/shared/tumqe0k76t
3nd vtune 230309 blended.xls http://www.box.net/shared/11uocp3p0e

Hi Scotty
Here is the link to the requested files

1st file vtunedata-001-210310.dm3 http://www.box.net/shared/kqfhbozg6a
2nd file vtunedata-002-210309.dm3 http://www.box.net/shared/dr5r2hz753
3rd file vtunedata-003-210310.dm3 http://www.box.net/shared/4o3q7ggt5v

Here is my 2nd tuning run

1ST map MT7 http://www.box.net/shared/fgp3m2uc55
2nd map MT7 http://www.box.net/shared/fxpa6kygij
3rd map MT7 http://www.box.net/shared/mxap0aqm3l
1st Histogram http://www.box.net/shared/y1z3fap7qo
2nd Histogram http://www.box.net/shared/8hu9su08jb
3rd Histogram http://www.box.net/shared/rhm0287j7m
1st vtune http://www.box.net/shared/5181gb2sfq
2nd vtune http://www.box.net/shared/55ru4ojlis
3rd vtune http://www.box.net/shared/pbeq42lf1i
1st dm3 file http://www.box.net/shared/7q7pl2nq6h
2nd dm3 file http://www.box.net/shared/mem4hvac4d
3rd dm3 file http://www.box.net/shared/m69kflc174
1st vtune excel http://www.box.net/shared/hdr3vaf2qz
2nd vtune excel http://www.box.net/shared/1kga8q0seb
3rd vtune excel http://www.box.net/shared/cpjnocc3ii

Scotty i couldnt work out how you blended the file from my first tune
I did load it and am still running it
The bike runs much smoother and very little pinging
I didnt try out a long run as i wanted to do a second tune
Hope you can advise me further

Harleynt

Here is the final blended file for my 2007 Fatboy
AE176-002-B1-final-blended.MT7 http://www.box.net/shared/uzo1l7csam
I will do one more tuning run using this file to compare

Hi
I have now done a 3rd tuning run
I have not blended the final fine yet as i need to understand a little more
Here is the 3rd run 2nd vtune http://www.box.net/shared/pbeq42lf1i
here is the 3rd run 3rd vtune http://www.box.net/shared/gvku09r8rj
I dont enderstand why they differ so much
I tried to do each run in a similar style
each run was on the same route
which is the better map to use
When blending do I ignore the yellow cells and only use the white or light pink ones
Here is the finalMT7 file that needs to be blended with the final vtune http://www.box.net/shared/jqu6pbez07
Any advice would be appreciated